Invitations, Paper Punches and Planning, Oh My!

Posted by Nat on Jun 8, 2011 | Comments Off on Invitations, Paper Punches and Planning, Oh My!

I love a good party.  What’s not to love about getting together with people you like and celebrating something… or just eating and drinking yummy things?  Last year we put on a Thank You Party for the teachers at Anna and Jack’s preschool, and it was a big success.  I didn’t get very many pictures last year- I’m hoping this year will be different.  Hindsight 20/20, Michael and I did way too much complicated food, so we were running around the whole time trying to balance entertaining with cooking.  This year I hope to choose much easier food that we can prepare ahead of time and then we can enjoy the company of our guests a lot more.  I will also have a new baby on my hands, so that’s another reason to keep it simple.

Every party starts with an invitation, and I wanted to try something different for these.  I’ve been oooohing and ahhhhing over Martha Stewart’s “Punch Around the Page” sets, and came across a coupon in one of her magazines for 40% off any item, so off I went to Michael’s.  I ended up buying this set:

I’ll admit I was a bit intimidated by these- I mean, really.  Can you really make them look as nice as they do in the photos of things that Martha’s people make?  The answer is: yes!  There is a bit of a learning curve, though, so I thought I’d share with you some of the things I ended up doing to help them look (close to) perfect.

Firstly, it’s important to know that you have to size your paper to a certain measurement in order for them to work correctly.  This makes sense, but it forced me to adjust my invitations a bit at the onset.  Also, do some practice punching on paper that doesn’t matter at all- scraps you’ve saved or something- just to get used to how they feel and work.  I do think they are very nice tools- they will last a long time.

I printed my invitations 8.5 x 5 inches.  I made about 4 extra so that if I messed up I didn’t have to print more- which ended up being wise because I did make a few bloopers.

Step 1 is to do your corners with the corner punch.  Turn it upside down so you can get it just right.

After your corners are done, you can do the edges.  This is where I made the most mistakes, but here’s what ended up working best.

The edge punch has a graphic guide that you line the corner up with.  I found that after punching those first segments just off the corners that I did better when I turned the whole thing upside down so I could see exactly where I was punching.

And here are some final product shots for you:

I just love all those little holes lined up.  I’m such a nerd.

Now that the invitations are out it’s time to plan, plan, plan.  I’m using two of my favorite magazines to lift ideas from.  I have some in my head, but nothing on paper yet.

How do you plan parties?   Any favorite sites or tools you use?  I’m a list person at the core.  I could use an app on my phone or something, I’m sure, but there’s something about writing a list out that helps my brain figure everything out.  More to come!

Starbucks Card Upgrade

Posted by Nat on Nov 16, 2010 | 2 comments

Hi friends,

Working has certainly taken its toll on my little blog here.  I hope after the holidays I can really come up with a system to keep posting more regularly.  We’ll see…

Onto my project…  I actually did this just before Halloween, but the backstory goes back even further.  I have a former student who I taught at school, and I also taught him piano lessons.  I met him in 2002 when I started my current job.  This year he started acting school at NYU.  Talk about a reality check- did you know that everyone grows up? It’s amazing, though, to watch a student grow into such an amazing person- he really is someone to be proud of.

Anyhoo, I procrastinated about giving him a graduation gift.  Then I bought the gift… and it sat for a little too long in my purse.  I’m amazed I didn’t use it instead, because I love me some Starbucks.  But I wanted to make sure he got something relatively funny and special to make up for the fact that his gift was totally late and not really that creative.  So I made over his Starbucks card.

Remember college?  If you went to college, I bet you wish you had an endless Starbucks card for those mornings when you wake up and need.  Coffee.  Immediately.  I harkened back to a day when I slept through an exam.  Actually, come to think of it, I graduated from college in 1998 and I don’t think I had been in a Starbucks more than 2 or 3 times.  I digress…

So first I hopped onto Photoshop and designed the new front for his card.

This is often how I feel in the morning, even though our budget doesn’t allow for Starbucks nearly as often as I’d like.

Then I slapped it onto the card- this was easy- I just tried to make sure the layer of Mod Podge was super thin because I didn’t want it to thicken the card up too much.

Then I traced the card holder to make it match.  I had to trace the holder both directions- a good lesson in spatial awareness.  🙂  I also had to make sure I traced the little notches, and I cut them with a razor knife before MPing.

Then I Mod Podged that sucker up as well.  Here’s the final product.  Note that I poked fun at myself for taking so long.  And you’ll probably see that the Mod Podge smeared the ink on my card- I did a thin coat on top and it did sort of “fog it up” but I sort of liked it, and also didn’t want to delay sending an already-late gift just because of some smeared ink.

I think I will do this again for Starbucks gifts- it was fun, easy, and once I got my rear in gear, a fun way to perk up an otherwise totally expected gift.

Beer Makeover

Posted by Nat on Aug 23, 2010 | 20 comments

I’ve been eyeing the six-pack beer containers for a while.  Not just for the delicious containers of summertime bliss, but for their revamp possibilities.  Last week I did a huge cleanup in my office- reorganized everything and made my creating space much more useable and functional.  Someday I’ll have a space like this or this, but that’s a long way off- right now I’m just happy to have a table and a closet.

When I was done I decided to get to work on the possibilities of this here beer container.  (Keep your beer preferences to yourself.  And if you haven’t tried this kind, give it a whirl- I love it.)

Here’s what you need if you’d like to repurpose your beer container.

• Beer container or anything else that holds cans/bottles
• Mod Podge (of course- it’s my new BFF apparently) and applicator (I like sponge brushes)  (I have MP Hardcoat pictured- was thinking of using it and decided not to)
• pencil or marker for tracing
• Scissors (I’ve only pictured my big pair, but I ended up using a small pair for the handles)
• Paper that you love, love, love and have been afraid to use for something because it’s just so nice.  Use it.  What’s the point in it sitting there?  There will always be more paper somewhere that you love.
• Any other cool, crazy accoutrements you’d like to add (stickers, letters, borders, zots, tags, etc.)
• Something to cover your worksurface.  Come on, we’re using MP people.

Steps to take:

• Drink the beer (sorry, had to say it)
• Decide how you want to use the paper- what’s going to go on the front, back, sides, etc.  I did not do this and ended up having to change things up.  It still looks fine, but I was momentarily bummed.
• Trace the different sides of your container on the paper and cut out.  You don’t have to be too precise- the parts that show on mine are hardly noticeable, and it just adds to the character.  I’ve had this paper on the left for years- I think, actually, for about 10 years.  I always thought I’d use it to write a letter or something, but never happened.   I just love her face and her arms.  I couldn’t bear to throw it away.  When I found it during my office reorganization I knew it had to be part of this- this way I can see her every day.  Love it.

• Mod Podge it up.  I painted the MP on the container first, smoothed the paper on top and then let it dry.  Then I came back to it 15 minutes later or so and painted the paper with MP.
• Add your “extras.”  I framed the girl in a frame I had that happened to look good with what I had.  Then I used 3-D Zots to lift her up a bit from the box- nice layered look, I think.  Here’s my finished product- I. Love. It.

Oh, but that’s just one side.  Here’s the rest, and a shot of it on top of my shelf.  The other side says, “Get your craft on!”  The two small sides say “create” and “love.”  I was going to do “create” and “inspire” but I ran out of R stickers.  Oh well.  Love is always a good thing, I say.  I’m using it to hold my (what else?) Mod Podge, acrylic sealer and brushes.  The slots are just a bit smaller than a large jar of MP, but since the cardboard is flexible it’s all good.

And now, here’s my little freebie for today:

I have 7 more pieces of this little lady.  Would you like to use her?  I’d love to send you a sheet- it’s just 8.5×11 paper, not thick at all.  My only condition is that when you make something with her you link up to this post and let me know what you do with her.  ‘M-kay?  Pictures would be awesome.  So, since I have 7 pieces, the first 7 peeps to post a comment will get her in the mail.  Make sure I can find you, either leave your email with the comment (not in the comment- in the box) or make sure your contact info is current on your blog.  That way I can get your address.  If you don’t want the paper but still like what I did, feel free to still leave a comment- I love to see what people think.

I am linking up to It’s a Blog Party,  C.R.A.F.T., and  Making the World Cuter.  Yee haw!

p.s.  I apologize for my excessive use of parenthesis.  (I can’t control myself.)

Welcome, Tutorial and a Giveaway (Wow!)

Posted by Nat on Aug 13, 2010 | 35 comments

I’m working on this whole “having your house rise up to meet you.”  Yeah, I know.  I’m a Martha fan and an Oprah fan.  Big time.  So sue me.

I’m also in the process of revamping our front door… area.  Stoop?  Threshold?  Doorstep?  You know- where people arrive.  More to come about that, but this whole revamp got me to thinking that aside from all the plants we have, there isn’t really anything to welcome people to our house.  I’ve seen little welcome signs around in stores, but none of them have the flair or look that I want.  I want them to be just the right size, not too big, not too small.  I don’t want them to be boring, but I don’t want them to be too busy because no one wants to be distracted while walking into someone’s house (especially me- I’m accident prone).

So I set to work.  Have you seen JSIM?  If not, get your booty over there- Cathe gives you free stuff all. the. time.  I recently downloaded some alphabets from Cathe  here and chose one to use for my sign (Cathe- you rock!).  I don’t own a Cricut or a Silhouette (someday?), so it was either print something on the printer or make it myself.  I was feeling artsy and techy, so I opened up Photoshop and put together “Welcome” from my favorite alphabet that Cathe gave me, and printed it out on a plain piece of 12×12 piece of paper to create a sort of mock stencil.  This did not look “pretty” when it printed- since it was a stencil it was just a functional thing.  You’ll see it below in the pictures.

Here are the other supplies you need (see list below the collage):

• Canvas or other crafty surface to put everything on (picture frame? bottom of a box?  endless possibilities)
• pencil & permanent marker; also a good eraser if you are sloppy like me
• paint brush with a thin tip
• Brushes and applicators for your Mod Podge and paint
• Mod Podge (if your sign will go outside you’ll want some Outdoor MP)
• Acrylic Paint in color(s) of your choosing
• Paper flowers (mine are by Bazzill Basics)
• buttons for flower centers (doesn’t matter what color they are- they will get covered up)
• coordinating scrap/craft paper (take the easy route- I chose two that were already paired together)
• any other scrappy/crafty things you’d like to use.
• paper plates for Mod Podging
• newspaper for covering your work surface
• scissors- I used two kinds (see photos) a basic pair and a small, extra-sharp pair for the detail work in the frame I cut out
• Clear Acrylic Spray- something to coat the finished product

Steps:

Paint the canvas a color you like.  Paint most of it, but you don’t have to paint the very center.  (I had orange and brown left over from this and this, so I mixed them up to get a nice fall orange going.)  Set aside to dry.

Mod Podge the top of your flowers, being careful not to MP them to whatever they are sitting on.  I really just did this to stiffen them up a bit in case the humidity gets to them over time.

Cut your background paper to the size you want.  Since my canvas was 11×14, I trimmed mine to about 10×12 (I think).

Choose a shape for your Welcome paper.  I was going to do an oval, but then while in Photoshop saw this oval frame and liked it better.  I printed the frame on my Welcome paper and cut it out.  The frame wasn’t as dark as I wanted because of the pattern on the paper, so I went over it again with a dark brown marker.  You could also just trace a shape you like, or draw one freehand, but I’m not that symmetrical in my drawing.

I turned the Welcome that I printed out from JSIM into a sort of pseudo-stencil.  I trimmed it up and traced parts of it on the paper, and then connected the dots.

Then I went over it in an archival pen, and then I painted it with paint so that it would look more handmade/crafty.  Here you can see I’m halfway done with the paint.

Get out your Mod Podge!  I used two types here- basic Matte MP for the first stuff, and then Outdoor MP for the last layer.  I did the two papers, background and Welcome, just on the back first, and then let them dry for about 30 minutes or so.  Before they set I went over them with a ruler to make sure there were no bubbles.  Then I came back and did the top of the paper.

Flowers:  I placed the flowers on with MP. Then I covered buttons with the same papers and MP’d them to the flowers.  This was all very messy, which is fun or awful depending on your level of  mess tolerance.  Since my children were not present, I loved it.  Had they been present, I probably would have received 5 phone calls and had to settle 3 tantrums.  Instead, I ModPodged in silent bliss.  It was great.

After all of that dried, I did the layer of Outdoor Mod Podge.  Note:  Outdoor Mod Podge is THICK stuff.  Work carefully and slowly.  Spread out what you have before glopping on more- especially with the flowers.

After all of that dried, I sprayed the whole thing with some clear acrylic spray (outside) and let it dry overnight.  Add a couple of hangers and some lovely brown ribbon and voila!  A welcome sign!

Here is what it looks like hanging on the wall.  I don’t think the ribbon will stay this long, but I just wanted to see it hanging to give you an idea of what it looks like because…

Giveaway Alert!

Here comes my surprise….

I made TWO!  One for me and one for one of you lovely readers.  My plan is to make one of these for each season and a few holidays (so yes, there will be more giveaways here at Crafting Crazy).  It was really fun to make, and if I can brighten my doorstep and yours, who can lose, really?

How can you win this Welcome Sign? Read on:

This Giveaway includes:

1) Polka-Dot Welcome sign pictured above

2) Two brass hangers for hanging (I will place them if you like, or send them along with the sign in case you aren’t sure how you want to hang it)

3) Lovely brown ribbon for hanging- you can let me know how long you’d like, or just let me guess how much you need.

How to win?  Share the love.  Lots of ways to win:

#1:  Leave a comment.  That’s all.  Just leave me a comment- say hello, I like your sign, I hope I win, anything.  Just leave a comment.

#2:  Look at the bottom of this post.  See the little bar down there that says “Sharing is Caring?”  Share my post somewhere from that bar, then come back here and tell me which one you used and if it was cool, annoying, easy, hard, etc.  This is a new tool and I don’t want to use it if it’s frustrating.  If something doesn’t work, tell me!  I need help with this one, so even if it doesn’t work, just tell me and that counts as an entry.

#3:  Do you tweet?  Follow me on Twitter (button is up on the right) and let me know via a comment.  If you already follow me (thanks!) then just let me know in a comment.

#4:  Subscribe to my blog via email.  In the right side bar near the top you’ll see a box that says “Subscribe to Crafting Crazy Via Email Updates”.  Enter your email, and leave another comment to let me know.

#5:  Use my RSS feed button (the little orange thing at the top right) or the Google button (below the orange thing) to add me to your blog feeds somehow.  Let me know- leave another comment.

I will announce the winner on Friday, August 20th and will send the winner the sign to hang.  I would love it, if you win the sign, to send me a picture of it hanging in/on your house so I can see where it ends up.  If you blog, I’d love a mention on your blog, too!

Can’t wait to see who wins!

Operation Organization

Posted by Nat on Jul 31, 2010 | 22 comments

This post could also be entitled “I love you, Ikea.”  Or, “I love you, Mod Podge.”

The challenge:  organize the hall closet.

A few weeks ago I was visited by my wonderful and oh-so-easy-to-talk-to friend, Jen, from Feng Shui Jen’s Way.  Jen, you inspired me to get my house’s rear in gear (which I guess means my own rear in gear).  I hope this post makes you proud!

Here is the hallway- it’s quite long.  I apologize in advance for the photo lighting- there are no windows, therefore not a lot of natural light going on. You can kind of see the closet on the right in this photo- it’s one of those old-school, folding door closets with narrow shelves that don’t hold anything very conveniently.  Great for my type-A personality.

Here’s the closet “before” (embarassing, I know):

You may notice the white tubs with the lovely pink sticky notes on them.  This was my half-a** attempt at organization.  Downside to the sticky notes (aside from looking horrid) was that they fell off.  Often.  I don’t like baskets for things like this- they look nice for a while, then they collect dust, and then they fall apart.  I needed and wanted tubs.  Ikea rocks in the tub department- did you know?

Here are the tubs in their plain, boring format.  The big ones are 5.99 and the little ones are 2.99.  They are from the Slugis collection.  See their specs here. (added:  Apparently this line of tubs has now been discontinued.  Insert maniacal crying here.) 🙁

I wanted to beautify them a little and also make them impervious to label-fall-offage.  So I went to my paper stash and picked some favorites.

I created a template and traced it on the back of the paper so I didn’t have to worry about marker showing through.  I used a nice thick permanent marker so I could cut precisely.

Then I started the Mod Podge process.  First I painted the face of the tub with a layer of MP.  I used a matte finish for this project because I didn’t want to be troubled with glaring labels whilst trying to find something.  Immediately after applying the first layer I put a piece of paper on top.  Then I slathered it up with some MP and let it dry.

I had a little bit of fun doing this- they were just so much nicer to look at after they were papered up.  Even Michael liked looking at them.  Aren’t they purty?!

Then I made labels for them.  I made them all 6 inches across to help them look uniform, and used the same font throughout.  I MP’d the labels on and then covered them with a layer of MP to finish.

The finished closet:

Can I say that I am in organization heaven?  I love opening this closet and knowing where everything is.  And the best part is that I didn’t fill them all up, so as we need to, I can put more labels on some.

BTW, this is the very first project where Mod Podge did exactly what I wanted it to.  The paper did not bubble, it went on nice and smooth- hooray!

I am so excited that this was featured on Amy’s Mod Podge Rocks Facebook page!  Yee haw!

I’m also going to link up to It’s a Blog Party’s Show Me How Party.  Yay for links!

A Thank You Invitation Questionnaire…of sorts

Posted by missmusic1976 on Jul 1, 2010 | Comments Off on A Thank You Invitation Questionnaire…of sorts

That’s right- not a Thank You Note (I’m horrible at getting those done- are you?).  A Thank You Invitation Questionnaire.  Got it?  🙂

One of the blessings in our lives right now is that, while I’d rather be a SAHM and taking care of my kids myself, we do LOVE our kids’ “school” (a.k.a., childcare).  Anna really loves her teachers, and she is learning a lot from them- more than I think I’d teach her on my own.  Her latest obsession is letters- she wants to know what letter so many words start with.

Sometime soon both kids will be switching rooms, and we want their teachers to know that we have appreciated them.   So we are pairing up with my friend Trish to throw them a really nice dinner- a Thank You Dinner.

The challenge we had (other than setting a date), was what to make.  That is why I decided to give them each a little questionnaire so that they could tell me their favorites.  I think it also stirred up some excitement…

First I printed the questions out on cardstock that had been cut to 5×7.  I wanted to know what dates would work for them, what they like to drink, if they eat meat, dessert choices, and if they wanted to be casual or get spiffed up.  I combed the web for some free graphics and then got to typing.  The two fonts I used are Cochin (plain) and “onetrickTony” (that’s the funky one- I love it!).  I’m pretty sure I got them at this site.

Here’s the front:

And the back:

Then I chose some paper that I’ve loved for a long time and have never been sure what to use it for.  I had 5×7 envelopes, so what I ended up doing was cutting the original pieces I printed down so that they were about 4.5 x 6.5.  Then I cut this pretty paper to 5×7.

Then I got out the paper adhesive and went nuts.  Since the paper wasn’t double sided, each questionnaire had to have two 5×7 pieces.  I had to print the questionnaires on two separate pages.  Then I stuck the pretty paper together, and stuck the questionnaires on those.  Clear as mud?

They ended up looking like this- very nice! (sorry for the not-so-great photography)

Finish it off with a great envelope with their names printed on them and voila!  Your Thank You Invitation Questionnaire is complete!

I have already taken them to school and they were filled out when I picked the kids up that day- I think they are a little excited.  I will keep you posted with the invites and the menu- can’t wait!