Coffee Table Upgrade with Mod Podge

Posted by Nat on Jun 18, 2011 | 12 comments

What else would I use to upgrade something?  I mean, really.

So we bought this table from West Elm right after we got married in 2005.  I cannot say that I recommend West Elm furniture for families with small children- it just didn’t hold up.  I loved the table when we first got it- it’s not too big, round (I love round tables for some reason), looked cool for a long time.  But our first condo faced west and the sun hit it during sunset, which took its toll.  Then Anna came, and she did a doozy on it.  I didn’t help either, what with my in-home-acetone-using-French-pedicures (ahem).  So, it was looking pretty sad.  We are now in abode #3, and it was really looking bad.  But we didn’t/don’t have the budget for new furniture right now.  We do, however, have a budget for craftiness and fabric- couldn’t possibly cost as much, right?!  Hmmm… not so sure, but I sure do like how this turned out.  Here’s the before:

I went to my local JoAnn Fabrics, spotted the fabric and loved it right away, so I bought 3 yards, and some black upholstery/pillow trim.  I stocked up on staples for my staple gun, made sure I had plenty of Mod Podge (fabric and hard coat) and a brayer (new fave tool!) and off I went.  In case you aren’t in the mood to scroll, here’s the finished product:

I apologize for the lack of photos- this was done months ago during my blogging break, but I will describe it as best I can.  I won’t say this is a tutorial, but if you ever ponder doing the same thing with one of your pieces of furniture, please shoot me questions and I’m happy to answer them.

First I poured a pretty hefty amount of Mod Podge (fabric) on the table and spread it out as evenly as I could over the top, but not the sides.  Then, I carefully laid the fabric on top, like so:

Then I used the brayer to roll the fabric out as flat as possible until I could see no air bubbles, no bumps, etc.  With the pattern in the fabric my eyes did cross a bit from time to time, and eventually I had to sit down and take a breather.

I waited a bit, and then I carefully trimmed off the excess fabric.  This is when the stapling began.  I wasn’t really sure how I was going to do this part- it was definitely a fly-by-the-seat-of-my-pants project.  But I ended up being happy with the results.  Basically I pulled the fabric straight down and stapled until I absolutely had to pleat it because of the direction the fabric was pulling.  It seemed scientifically impossible to get it all to lay flat on the sides.  You’ll see in the collage below that there are just some pleats here and there- I stapled them as tight as I could- my fingers were nearly raw by the time I finished.

Finally, I added the trim with a hot glue gun.  I think in hindsight I should have stapled at least the beginning down with a staple or two, but it’s holding up great so far, so maybe it’s not completely necessary?

I wasn’t done yet, though.   I started the Mod Podge process with the hard coat formula using sponge applicators.  I have only been able to find MP hard coat in the smaller jar, and I started with two jars, but ended up buying two or three more.  I always did these coats after the kids went to bed so it could dry over-night.  I decided to go with the “built up finish” because I knew this table would be put under great duress by us and the kids, and the more layers, the better.  This equates to a minimum of 5 coats.  After 5 coats, I didn’t feel it was done yet.  There were lots of ripples in the MP, and I was curious to see if they would go away with a few more coats.  I think I probably did 10 coats or so- it was a lot.  It was also a bit tacky, as MP sometimes is, and I didn’t know what to do about that.  In the end I first sanded it a bit with a really fine-grain sand paper, then sprayed the top and sides with two coats of clear acrylic spray.  I’m actually not convinced I’m done with it, but it’s holding up great until I figure out what to do- maybe I’ll put some custom-cut glass on it someday when the kids are a bit older?  Or maybe by then we’ll be able to afford a new table… Hmmm…     Anyhoo, here are some more shots of the finished product:

Picture Frame Gallery

Posted by Nat on Jun 3, 2011 | 2 comments

We have a ranch-style house (I think).  It’s all one level, which I love, and it has a loooooong hallway down the bedroom side.  We’re talking 30+ feet.  Really long.

When we moved into this house, which my husband grew up in, we had tons of projects, so for quite a while this one sat by the wayside, waiting to be done.  I had lots of thoughts about how to hang pictures, but it wasn’t until I saw this idea on Martha’s website that I got my rear in gear and starting putting this together.

Here’s the before, with just our small photo gallery that my mom gave me from Red Envelope.  (I actually need to email them because some of the frames aren’t holding up…)  Many apologies for the lighting- there is very little natural light in this hallway.  We hope to put in skylights someday, but until then…

And here’s the after:  voila!

I really love the end result.  Here’s a little bit about my process.

This was a very overwhelming task now that I look back and think about it.  Because of the layout I decided to do things in a way that felt a little bit backwards- I didn’t even think about what pictures to use- I just collected frames.  I wanted the frames to be uniform in color, and most of them were black.  But we were definitely on a budget and I didn’t want to buy frames unless I needed to, so I went through our huge collection of unused frames and pulled any that were black, or useable, but not black.  Then I spray-painted the ones that were not black.

I did have to make a trip to get a few more- I chose to hit up Wal-Mart.  My theory on frames is that once they are on the wall, it doesn’t matter if it was $3.00 or $30.00- it’s a frame.  This was a good thing, because Wal-Mart has some cheap frames!

I followed the directions on Martha’s website pretty much verbatim.  The one thing that I was very glad to have was the laser level with 3M Command Strips- that way I could easily make sure the dividing line was/is level.  Lots of painter’s tape was involved as well.  Lots.

Once I had the frames ready, I taped off the dividing center line.  Then I grouped the frames into four groups so that I wouldn’t have two identical frames right next to each other.  This made hanging go a bit faster because I didn’t have to stop and think-  just measured, taped, nailed and hung.  It took several hours to do.

(horrible lighting- sorry!)

Once the frames were up it was time to think about pictures.  I didn’t want them to be haphazard- I wanted each row to have it’s own theme.  I came up with this formula (pardon the elementary-ish Photoshop skills):

Then I started a folder on my laptop and dumped photos into it whenever I had a chance.  I used Photoshop Elements to print a contact sheet with little thumbnails of the possible pictures, and I taped them onto the frames so I could go over them with Michael and we could decide.

(our whole hallway looked like this for quite a while)

I had most of my family history pictures, but I had to coordinate with Michael’s mother and father to get his side.  Once the last few pictures went in it was like our house was complete (in a few ways, at least).

Did I leave anything out?  Let me know if you have questions- this was so great for this super long hallway.  How do you like to hang your picture frames?

Martha! I Made It! Sewing Notions Organizer

Posted by Nat on May 30, 2011 | 8 comments

Whew!  I’m back!  I’m sure there are still several things to tweak on this new (and hopefully improved) site, but I need to get posting, wouldn’t you say?

I completed this project months ago and am so happy to a) have made it, and b) never have to make it again.  Ever.

You may have seen in my post about our house that we have an office.  It looks much different than it used to because now it’s a guest room AND my craft room AND an office.  While I didn’t need the office desk anymore, I did need help with all of those sewing notions that pile up.  I hate digging for stuff.  Maybe it goes back to my lovely run-in with scabies in Italy (shall I post about that sometime?  You tell me….), or perhaps it’s just that when I have to dig for something it’s a reminder that I should be more organized in whatever area it is I’m digging in.  This project eliminated a lot of that.   I am also a huge fan of taking advantage of vertical space.  Hence:

These sit above my sewing table, and they hold not only the things I use most when sewing, but also some crafting tools, as well.  And of course, it’s all because of Martha….

If you consult your Martha Stewart’s Encyclopedia of Sewing and Fabric Crafts, you’ll find this one on page 267. I apologize in advance for not taking great pictures- this was definitely in my “blog break” time and I was really doing this for myself.

I’ll walk you through what I did and what I used- I used the instructions in the book as a guide, but really had to wing some of it.  As a result some of my pockets didn’t turn out super swell, but that’s okay- they work.  You’ll see in photos below I actually made three of them, and the middle one has office supply things in it, which is nice.

In the book they suggest using homasote fiberboard.  When I went looking for homasote fiberboard I could not find it in a small enough size.  The one size I saw at Home Depot was big enough to warrant bungee cords on top of my car, and that felt a liiiiiittle over the top, so I opted for some plain pieces of wood.  The two squares are 24×24, and the middle one is 12×24. I then used some quilt batting and spray adhesive to give them a softer look.  I wrapped them up with the fabric and taped them in the back temporarily while I figured out what was going to go where.   Then I pulled everything that was driving me crazy and laid them out like you see here just above.  This took a long time.  I really wanted to get it right, so I debated for probably-excessive amounts of time making sure I could fit everything I wanted. I really took the photos of the layouts so that I could refer back to them while I was in the process- if you decide to make one or more of these I highly recommend it!

The most time-consuming part, however, was cutting the fabric for the actual pockets.  The book gives you a formula for adding length and/or height depending on the pocket you want to make, so I followed that and for the most part it worked out just fine.   What was challenging was keeping them all straight so that I didn’t a) get them mixed up and b) remembered where they were supposed to go.  You also have to press them and sew the tops over so that they look nice (who’d-a-thunk- Martha wants something to look…nice?). 

Here is a collage of some of the process.  You can see that I ended up using some office labels to keep everything organized.  This worked nicely because they stuck nicely to the fabric without ruining it, so once I had the pocket in place and ready to go, I could toss the label and it was like checking off an item on a to-do list.  Done!

The bottom left photos shows the middle panel I made for office supplies- and you can kind of see that I taped a border around the edge.  I did this to help myself remember where the edge of the wood would end up being- sort of helped me keep everything level, I guess.  And the bottom right is just a sketch of each board so I could write down measurements, placement, etc.

Once I had the pockets sewn on I stapled them to the wood on the back with a staple gun about 8 million times.  My husband helped me place the hanging wires on the back and, since we used wood which is much heavier than the fiberboard, we made sure to hang them on studs in the wall so that they wouldn’t fall off eventually (crossed fingers).  Here are a few more pictures of the final product as it looks in my office:

It’s hard to tell in these photos but my office is still a dusty lavender- quite similar, actually, to my new background color on this blog.  I love it.  And the gray of the fabric and the print really looks nice.  You can also see that I made some little cups to hang- it looked sort of empty in between and I had a ton of fabric left over, so I made six little hanging….cups(?) to put things like buttons, pins and safety pins in.

How do you organize your sewing notions?  If you decide to make something like this, give yourself plenty of time and don’t rush.  I didn’t rush this one and I still made a few mistakes, but I still love the final product.  My pockets don’t look nearly as perfect as the stuff in Martha’s book, but it’s so very nice to have this stuff right in front of me whenever I need it.   If you have a question, if I left something out, please leave a comment!  I’m going to link up to some link parties, too, as soon as I get a chance!  And if you’re all the way down here at the bottom, thanks for reading this far!

I linked up to:

Night Owl Crafting

Sew Much Ado

Creations by Kara

A Journey and a Pillow

Posted by Nat on Sep 8, 2010 | 3 comments

I have begun a journey that I know will end on June 17, 2011.  I have begun my final year of teaching.  I have mixed feelings about it.  I still like teaching in the moments with my students- I love giving children joyful experiences through music, I love the teachers I work with, and I think if I have a traditional job, I want it to be teaching.  But my life has become one that I see needing a non-traditional scenario.  I watch hundreds of moms throughout the week picking up their kids from school and walking home with them, and realize that I want to be that mom.  I want to be able to pick my kids up from school, I want to be there when they have a bad day so I can give hugs and homemade cookies.  I want to be there for them- it’s the most important thing.  And so, with this realization last year, I told my husband and my principal (in reverse order) that this is my last year of teaching.  I needed to name it and speak it in order for it to happen.  That, coupled with my newfound love of sewing and creating things with love has instilled in me a lot of hope.  I have no idea if we’ll be able to “make it” without me working.  Rather, I’m sure we’ll “make it” but it will be a different kind of life.  But it’s the life I want; my current life is hard to handle on a day-to-day basis.  I can’t keep up with myself, my kids, my relationships…. the list goes on.  I don’t handle being two people well.  I want to be a good teacher, but it’s more important to me to be a good mom than anything else.

This blog is going to be sporadic while I’m working- I hope to keep up with posts.  I am for sure unable to stop sewing- even if I want to take a break, an idea comes to me and I make it or else it eats at me.  I’m also addicted to giving things I make to family and friends- it’s so much fun.   So I hope that those of you who are reading this blog consistently stick with me- I can’t wait until I can consider myself a true SAHM and a full time blogger/crafter.  I fantasize about it.  No really.  I do.

On to one of my latest projects.  I posted here about my duvet cover that I made.  Yeesh- I can’t believe I made that thing.  I needed to finish it off with an accent pillow, so here it is:

It’s that little green thing in the middle of the two white pillows.

To make the slipcover for this accent pillow, I followed this tutorial at Cottage Magpie that I found while hunting for tutorials.  (That, by the way, is an addiction in and of itself.)  This tutorial is GREAT- I wouldn’t change anything.  I will probably never buy pillows ever again- it’s so much easier to pick your own fabric and make exactly what you want.

My pillow is 14×14 and a bit chubby, and because I wanted the fit to be just right I cut the fabric to be 15.5×15.5.  This gave me plenty of wiggle room, and since the cotton is nice and crisp, it looks great.   The only thing I did differently was the back two pieces are slightly bigger than what is recommended in the tutorial because I didn’t want there to be any pillow showing.  So my two back pieces were 15.5 x 10.5.  This gives you a nice, flat overlap in the back.

Here are some closeups:

It’s amazing what a little pillow can do!  Now if we could just get the rest of the room finished…

Welcome, Tutorial and a Giveaway (Wow!)

Posted by Nat on Aug 13, 2010 | 35 comments

I’m working on this whole “having your house rise up to meet you.”  Yeah, I know.  I’m a Martha fan and an Oprah fan.  Big time.  So sue me.

I’m also in the process of revamping our front door… area.  Stoop?  Threshold?  Doorstep?  You know- where people arrive.  More to come about that, but this whole revamp got me to thinking that aside from all the plants we have, there isn’t really anything to welcome people to our house.  I’ve seen little welcome signs around in stores, but none of them have the flair or look that I want.  I want them to be just the right size, not too big, not too small.  I don’t want them to be boring, but I don’t want them to be too busy because no one wants to be distracted while walking into someone’s house (especially me- I’m accident prone).

So I set to work.  Have you seen JSIM?  If not, get your booty over there- Cathe gives you free stuff all. the. time.  I recently downloaded some alphabets from Cathe  here and chose one to use for my sign (Cathe- you rock!).  I don’t own a Cricut or a Silhouette (someday?), so it was either print something on the printer or make it myself.  I was feeling artsy and techy, so I opened up Photoshop and put together “Welcome” from my favorite alphabet that Cathe gave me, and printed it out on a plain piece of 12×12 piece of paper to create a sort of mock stencil.  This did not look “pretty” when it printed- since it was a stencil it was just a functional thing.  You’ll see it below in the pictures.

Here are the other supplies you need (see list below the collage):

• Canvas or other crafty surface to put everything on (picture frame? bottom of a box?  endless possibilities)
• pencil & permanent marker; also a good eraser if you are sloppy like me
• paint brush with a thin tip
• Brushes and applicators for your Mod Podge and paint
• Mod Podge (if your sign will go outside you’ll want some Outdoor MP)
• Acrylic Paint in color(s) of your choosing
• Paper flowers (mine are by Bazzill Basics)
• buttons for flower centers (doesn’t matter what color they are- they will get covered up)
• coordinating scrap/craft paper (take the easy route- I chose two that were already paired together)
• any other scrappy/crafty things you’d like to use.
• paper plates for Mod Podging
• newspaper for covering your work surface
• scissors- I used two kinds (see photos) a basic pair and a small, extra-sharp pair for the detail work in the frame I cut out
• Clear Acrylic Spray- something to coat the finished product

Steps:

Paint the canvas a color you like.  Paint most of it, but you don’t have to paint the very center.  (I had orange and brown left over from this and this, so I mixed them up to get a nice fall orange going.)  Set aside to dry.

Mod Podge the top of your flowers, being careful not to MP them to whatever they are sitting on.  I really just did this to stiffen them up a bit in case the humidity gets to them over time.

Cut your background paper to the size you want.  Since my canvas was 11×14, I trimmed mine to about 10×12 (I think).

Choose a shape for your Welcome paper.  I was going to do an oval, but then while in Photoshop saw this oval frame and liked it better.  I printed the frame on my Welcome paper and cut it out.  The frame wasn’t as dark as I wanted because of the pattern on the paper, so I went over it again with a dark brown marker.  You could also just trace a shape you like, or draw one freehand, but I’m not that symmetrical in my drawing.

I turned the Welcome that I printed out from JSIM into a sort of pseudo-stencil.  I trimmed it up and traced parts of it on the paper, and then connected the dots.

Then I went over it in an archival pen, and then I painted it with paint so that it would look more handmade/crafty.  Here you can see I’m halfway done with the paint.

Get out your Mod Podge!  I used two types here- basic Matte MP for the first stuff, and then Outdoor MP for the last layer.  I did the two papers, background and Welcome, just on the back first, and then let them dry for about 30 minutes or so.  Before they set I went over them with a ruler to make sure there were no bubbles.  Then I came back and did the top of the paper.

Flowers:  I placed the flowers on with MP. Then I covered buttons with the same papers and MP’d them to the flowers.  This was all very messy, which is fun or awful depending on your level of  mess tolerance.  Since my children were not present, I loved it.  Had they been present, I probably would have received 5 phone calls and had to settle 3 tantrums.  Instead, I ModPodged in silent bliss.  It was great.

After all of that dried, I did the layer of Outdoor Mod Podge.  Note:  Outdoor Mod Podge is THICK stuff.  Work carefully and slowly.  Spread out what you have before glopping on more- especially with the flowers.

After all of that dried, I sprayed the whole thing with some clear acrylic spray (outside) and let it dry overnight.  Add a couple of hangers and some lovely brown ribbon and voila!  A welcome sign!

Here is what it looks like hanging on the wall.  I don’t think the ribbon will stay this long, but I just wanted to see it hanging to give you an idea of what it looks like because…

Giveaway Alert!

Here comes my surprise….

I made TWO!  One for me and one for one of you lovely readers.  My plan is to make one of these for each season and a few holidays (so yes, there will be more giveaways here at Crafting Crazy).  It was really fun to make, and if I can brighten my doorstep and yours, who can lose, really?

How can you win this Welcome Sign? Read on:

This Giveaway includes:

1) Polka-Dot Welcome sign pictured above

2) Two brass hangers for hanging (I will place them if you like, or send them along with the sign in case you aren’t sure how you want to hang it)

3) Lovely brown ribbon for hanging- you can let me know how long you’d like, or just let me guess how much you need.

How to win?  Share the love.  Lots of ways to win:

#1:  Leave a comment.  That’s all.  Just leave me a comment- say hello, I like your sign, I hope I win, anything.  Just leave a comment.

#2:  Look at the bottom of this post.  See the little bar down there that says “Sharing is Caring?”  Share my post somewhere from that bar, then come back here and tell me which one you used and if it was cool, annoying, easy, hard, etc.  This is a new tool and I don’t want to use it if it’s frustrating.  If something doesn’t work, tell me!  I need help with this one, so even if it doesn’t work, just tell me and that counts as an entry.

#3:  Do you tweet?  Follow me on Twitter (button is up on the right) and let me know via a comment.  If you already follow me (thanks!) then just let me know in a comment.

#4:  Subscribe to my blog via email.  In the right side bar near the top you’ll see a box that says “Subscribe to Crafting Crazy Via Email Updates”.  Enter your email, and leave another comment to let me know.

#5:  Use my RSS feed button (the little orange thing at the top right) or the Google button (below the orange thing) to add me to your blog feeds somehow.  Let me know- leave another comment.

I will announce the winner on Friday, August 20th and will send the winner the sign to hang.  I would love it, if you win the sign, to send me a picture of it hanging in/on your house so I can see where it ends up.  If you blog, I’d love a mention on your blog, too!

Can’t wait to see who wins!

Our Family Rules!

Posted by Nat on Jul 28, 2010 | 2 comments

You could read that two ways:

A)  Our family RULES!  (As in, our family is totally rad- and it is)

or

B)  Our family rules (As in, here are our Family Rules).

You pick.

Up there in my header there’s a list of Things I’d Like to Make.  I need to add to it because I’ve seen some pretty awesome stuff in the last few days.  One thing this 31DBB Challenge is doing is getting me to click around incessantly on the internet.  Ridiculous.  Often it’s worth my while, and occasionally I have to smack myself upside the head and get crackin’ on something of my own.  In this case, it was the Family Rules.

I first saw this idea on one of my fa-fa-favorite blogs, The Pleated Poppy.  You can see Lindsey’s fabric version here, and her friend Nicole’s version here.  If you look at the comments on their blogs you will see that many others have made these and I am way late on this bandwagon.  But better late than never, I say.

What I like about these, other than the crafty part, is that it’s a great reason to sit and think about what you want for you family.  What are your core values?  Get ’em up on the wall where you can see them daily.  I collected ones I saw on the web and then altered and added to suit our tastes, and then showed them to Michael.  He added some more and off I went.  Actually, I didn’t have to get much- just the canvas and the orange paint.

Here is my finished Family Rules:

One thing I did differently is I totally copped out on the whole font thing.  Many of the other blogs I read did their fonts by hand.  For reals.  I’m toooo lazy, and I’m also lucky enough to own a Canon i9900, which will print on a 12×12 piece of paper.  Hindsight 20/20, I wouldn’t have done it quite the same if I were to do it again, but I am still pleased with the turnout.  (And I’d still be totally lazy and print those puppies rather than do them by hand.)

I learned, however, that white ink is not Mod Podge friendly, or at least the white ink I used is not.  See the one that says “Celebrate together”?  I wanted it to *pop* on the paper which, though it’s hard to tell in the photo, is a shimmery paper.  So I spent a ridiculous amount of time covering the blank ink from my printer with white ink, only to have it wipe off when I Mod Podged it.  (Can you use Mod Podge as a verb?  Not sure…)  For some reason the other one I did, “Say grace and clean up after yourself” did not have the same problem, so it must have something to do with the paper.  Oh well- it’s all shellacked now anyway.

Here are some close ups of the smaller ones- I had to get creative because I ran out of room, so this was my solution:

Here are all of our rules (they are not in this order on the finished product):

1. Have fun, be silly
2. dance, hug and snuggle often
3. Celebrate together
4. Say, “I love you” (lots and lots)
5. Have an open mind
6. Be kind and respectful
7. Obey your parents
8. tell the truth even if you might get in trouble
9. share    listen    (these ended up as small ones so I separated them)
10. Give your guest your best
11. Mom & Dad:  remember your wedding day
12. hands are for hugging not hitting
13. encourage your siblings… share in their joy
14. there’s no such thing as too much reading
15. never give up
16. act responsibly, choose wisely
17. keep your promises
18. Use your manners- say please and thank you
19. Say grace and clean up after yourself
20. Ask lots of questions
21. Use your creativity
22. Try another point of view
23. Remember that God is Father of us all

If I get some requests I will be happy to post the names of the fonts I used- I am a total font junkie which is part of the reason I loved this project.  Such a nerd, I am.  I would do it now but I have consumed far too much BV Cab, and fear I would list them inaccurately.  🙂

I love this- it adds so much color to our kitchen, and is one of a bunch of things I’ve been doing this week to get organized and get homey before the school year starts.  I love coming home to a house with love and life, and I feel like I’m getting there.  Just wait until you see my other project from this week…. coming soon!